The Eminence EJ1250 16ohm 12" Signature series guitar speaker

PRICE MATCH AVAILABLE!

Available NOW!!!

The Eric Johnson signature EJ1250 12" Guitar speaker from the Eminence 'Signature Series' guitar range.
Very natural & warm sounding with a balanced sound across it's entire frequency range
The EJ1250 offers plenty of clear low end and has a smooth mid section coupled with sweet sounding highs
The EJ is well suited to open or closed back guitar cabinet applications
The driver is hand made in the USA.

email: [email protected] if you find a cheaper price for this EMINENCE loudspeaker
Model: Eminence EJ1250A
note: Price includes VAT

Nominal Basket Diameter 12", 304.8mm
Nominal Impedance* 16 ohms
Power Rating** Watts 50W
Resonance 89.98Hz
Usable Frequency Range 80Hz - 5.1kHz
Sensitivity*** 100.9dB
Magnet Weight 35 oz.
Gap Height 0.31", 7.95mm
Voice Coil Diameter 1.75", 44.45mm

Thiele & Small Parameters
Resonant Frequency (fs) 89.98Hz
DC Resistance (Re) 7.19
Coil Inductance (Le) 0.62mH
Mechanical Q (Qms) 12.41
Electromagnetic Q (Qes) 0.65
Total Q (Qts) 0.62
Compliance Equivalent Volume (Vas) 44.96 liters / 1.59 cu.ft.
Peak Diaphragm Displacement Volume (Vd) 62.34cc
Mechanical Compliance of Suspension (Cms) 0.12mm/N
BL Product (BL) 12.91 T-M
Diaphragm Mass Inc. Airload (MMs) 26.55 grams
Efficiency Bandwidth Product (EBP) 139.0
Maximum Linear Excursion (Xmax) 1.2mm
Surface Area of Cone (Sd) 519.5 cm2
Maximum Mechanical Limit (Xlim) N/A

Mounting Information
Recommended Enclosure Volume
Sealed Acceptable
Vented Acceptable
Driver Volume Displaced 136.7 cu.in. / 2.24 liters
Overall Diameter 12.02", 305.31mm
Baffle Hole Diameter 10.97", 278.64mm
Front Sealing Gasket Fitted as standard
Rear Sealing Gasket N/A
Mounting Holes Diameter 0.25", 6.35mm
Mounting Holes B.C.D. 11.63", 295.4mm
Depth 6.22", 157.98mm
Net Weight 8.5 lbs, 3.86 kg
Shipping Weight 11.1 lbs, 5 kgs

Materials of Construction
Coil Construction Copper voice coil
Coil Former Paper former
Magnet Composition Alnico magnet
Core Details Non-vented core

Basket Materials Pressed steel basket
Cone Composition Paper Cone
Cone Edge Composition Paper cone edge
Dust Cap Composition Zurette dust cap