Celestion AN2775 2.7 " 35W 8 Ohm Compact Array Loudspeaker
PRICE MATCH AVAILABLE!

email: [email protected] if you can find a cheaper price for the Celestion AN2775

Using their market-leading experience in the design of high- performance, small-format professional audio drive units, Celestion has created an all-new range of compact and lightweight loudspeakers that are ideally suited to many sound reinforcement applications.

These drivers have been optimized using Finite Element Analysis (FEA) to give a wider dispersion characteristic than conventional loudspeakers of this size. In addition, they feature a space-efficient square chassis profile allowing them to be positioned more closely to each other for improved coupling.

With Celestion's Compact Array Drivers, systems designers are now able to build into their products some of the principal advantages offered by line array designs: a more even distribution of the acoustic signal and the ability to project sound over greater distances.

•Compact and lightweight, full-range neodymium loudspeakers
•Advanced Finite Element Analysis techniques used for acoustic, mechanical and electromagnetic modelling
•Ideal for applications such as portable line arrays where actively controlled wavefront (beam steering) is used
•Delivers wider dispersion to higher frequencies than many equivalent compact, full-range drivers on the market
•Chassis purpose-designed for maximum free air movement, with square mounting frame to facilitate close coupling of multiple units
•Stiff and light aluminium cone remains rigid to higher frequencies, delivering a smoother response in the critical listening band
•Half roll elastomer surround provides damping for unwanted resonances and sustained centring control at extremes of excursion •Designed to be weather resistant for outdoor applications

note: Price includes VAT

• Nominal diameter 2.75"/70mm
• Power rating 20Wrms
• Nominal impedance 8 Ohms
• Sensitivity 84dB
• Frequency range 160Hz-20kHz
• Voice coil diameter 20mm/0.75in
• Chassis type Glass reinforced ABS
• Magnet type Neodymium
• Coil material Round Copper
• Former material Polyimide
• Cone material Aluminium
• Surround material Elastomer
• Xmax 1.5mm/0.06in
• Gap depth 3mm/0.12in
• Voice coil winding width 6mm/0.24in
• Voice coil material Round Copper
• Voice coil former material Polyimide
• Bandwidth 190Hz-20kHz

• D 60mm/2.36in
• Fs 150Hz
• Mms 1.83g/0.06oz
• Qms 12.21
• Qes 1.67
• Qts 1.47
• Re 5.20Ω
• Vas 0.58lt/0.020ft3
• Bl 2.43
• Cms 0.51mm/N
• Sd 28.27cm2/4.38in2

• Cut-out diameter 2.6"/66.1mm
• Overall depth 1.8"/45mm
• Fitting 4 x M4 holes
• Mounting PCD range Ø3.2"/82mm
• Overall size 2.8" x 2.8"/71.3 x 71.3mm
• Unit weight 100g/3.53oz